欢迎来到中国电源学会电子资源平台

电源学报 2022年05月 第20卷 第3期

  • 共收录 22 篇内容
  • 413
  • 0
  • 0
  • 0
  • 期刊类型:
    电源学报
  • 主编:
    韩家新  
  • 出版日期:
    2022-05-01
  • 出版周期:
    双月刊
关键词
  • 均衡策略
    (10)
  • 主动均衡
    (10)
  • 滑模控制
    (10)
  • 通用发生函数
    (10)
  • 状态转移矩阵
    (10)
  • 马尔科夫方法
    (10)
  • 温-湿关联影响
    (10)
  • 电池元件
    (10)
  • 故障定位
    (10)
  • 桥式倍压单元
    (10)
  • Boost-Sepic
    (10)
  • 荷电状态
    (10)
  • 空间矢量扇区
    (10)
  • 空间矢量脉冲宽度调制(SVPWM)
    (10)
  • Boost变换器
    (10)
  • 频率自适应
    (10)
  • 铁路功率调节器
    (10)
  • 逆系统方法
    (10)
  • 电网电压不平衡
    (10)
  • 预测控制
    (10)
作者
  • 贺梧童
    (10)
  • 党超亮
    (10)
  • 李奕飞
    (10)
  • 潘道远
    (10)
  • 时培成
    (10)
  • 高清振
    (10)
  • 陈延明
    (10)
  • 慕永云
    (10)
  • 朱梦梅
    (10)
  • 周广旭
    (10)
  • 高佳
    (10)
  • 马建辉
    (10)
  • 陆益民
    (10)
  • 毛荀
    (10)
  • 占勇
    (10)
  • 王峰
    (10)
  • 毛勋
    (10)
  • 高波
    (10)
  • 龚翌凡
    (10)
  • 钱豪豪
    (10)
获取方式
  • 会员
    (10)
  • 付费
    (10)
  • 限免
    (10)
当前 1 - 10 , 共 22 条记录
  • 期刊论文
    作者: 孙绍哲  ,  杨志超  ,  李虹  ,  孙少哲  ,  李红  ,  赵明敏  ,  赵鹏  ,  林珊珊
    页码: 196 - 212
    2025/01/01
    23
    0
    0
    0
    电子式互感器的信号采集单元在隔离开关空载母线分合闸过程中,受到甚高频暂态过电压(VFTO)的严重影响。为提高电子式互感器的抗扰度,基于110kV AIS隔离开关分容性小电流试验平台,对电子式电压互感器信号采集单元信号线中的骚扰电流进行了分析,并通过实测进行了验证。结果表明:L线中的骚扰电流主要由电容分压器低压端电容上的暂态过电压引起,N线中的骚扰电流主要由电容分压器接地点电位抬升引起,二者在频率和幅值上存在较大差异。为研究共模骚扰电流的主要影响因素,基于分析与实测建立了仿真模型,并通过不同工况下的仿真与实测结果对比进行了验证。仿真结果表明:共模骚扰电流幅值与接地电感值、对地分布电容值呈正相关。
    查看更多
  • 期刊论文
    作者: 高博  ,  高波  ,  毛勋  ,  毛荀  ,  王峰  ,  占勇
    页码: 187 - 195
    2022/01/01
    33
    0
    0
    0
    为保障微网安全稳定运行并提高其能源利用率,研究了一种基于相关性分析的微网分布式电源能量管理协调控制方法。根据微网能量管理系统的特点,为确保微网功率平衡、电压频率稳定及高等级负荷优先供电等符合电能质量标准的控制目标,构建了以满足微网及储能装置功率需求为约束条件的微网分布式电源能量管理模型。在此基础上,通过负荷Agent控制策略,基于微网分布式电源、线损及各负荷有功功率之间的相关性分析,合理分配微网能量,从而实现微网分布式电源的能量管理。算例仿真结果表明,所提管理控制方法可显著降低用户运行成本,保证光伏发电与风力发电的最大出力,并确保微网波动频率与电压符合国家标准偏差,其中电压波动幅值小于5%,稳定性优异。
    查看更多
  • 期刊论文
    作者: 佘东  ,  SHE Dong  ,  HU Zhongyu  ,  胡中玉
    页码: 179 - 186
    2022/01/01
    19
    0
    0
    0
    A novel predictive current control scheme is designed to solve the problem of optimal control of an active power filter (APF) with LCL filter. The traditional APF controller uses multi-rotation coordinate system transformation and a PI regulator to control the harmonics. In addition, the resonant control scheme is also available. However, both of them have a disadvantage, i.e., the computational burden increases with the growing order of harmonics. In the novel predictive current control scheme, the proportional predictive control, integral predictive control and the damping algorithm are combined to achieve the optimal control of APF under the condition of fixed computational burden, where the integral predictive control can compensate the model error caused by parameter disturbance. Dynamic and static experiments were carried out on an APF experimental platform, and results verified that the proposed novel predictive current control scheme had an excellent control performance under both the steady-state and varying load conditions, and it can also complete the compensation for high-order harmonics.
    查看更多
  • 期刊论文
    作者: 汪玉凤  ,  王玉峰  ,  兰浩浩  ,  钱豪豪
    页码: 170 - 178
    2022/01/01
    20
    0
    0
    0
    To improve the operation reliability of active power filter (APF) system, a novel diagnostic method based on the standardized line voltage error for open-circuit faults in a three-phase three-level parallel APF power switch is proposed. According to the line voltage error between the value in a normal state and that in a fault state, the fault diagnosis and location can be implemented through the analysis of the logical relationship between the error and the system’s control state signal and output current. To simplify the algorithm, the values of line voltage error are standardized with respect to the DC side. The set thresholds are compared with the diagnostic variables to eliminate the measurement error. Meanwhile, a time standard is used to improve the reliability of fault diagnosis. As a result, the fault diagnosis and location can be realized simultaneously. In addition, the time consumption is limited to several sampling periods, indicating that this method has characteristics of satisfying rapidity and reliability, and it is also suitable for the dynamic response process of the system. Simulation results verify the effectiveness of the proposed method.
    查看更多
  • 期刊论文
    作者: 刘威  ,  刘伟  ,  唐传宇  ,  唐传雨  ,  王天如  ,  那伟  ,  孙金磊
    页码: 161 - 169
    2022/01/01
    19
    0
    0
    0
    电池组以串联或并联方式连接单体电池,广泛应用于各类储能系统。由于制造工艺和使用环境的差异,单体电池间内阻、库仑效率等参数不一致,经反复充放电后导致功率消耗不均衡,进而造成电池组可用容量下降及整体性能退化。为解决该问题,本文提出一种面向串联电池组的主动均衡电路拓扑,其由源自正激变换器的双向DC-DC变换器与开关矩阵构成。在分析主电路工作原理基础上,进一步提出一种基于聚类分析的荷电状态(SOC)均衡策略。对由8节串联单体电池组成的不均衡电池组开展均衡验证实验。结果表明:均衡操作后电池组可用容量提升,验证了所提均衡策略及均衡系统的有效性。与传统“均值-差值”法(可用容量提升2.6%)相比,所提均衡策略(提升10.8%)对电池组一致性改善效果更优,可用容量提升更显著,且两种方法均衡时间基本相当。
    查看更多
  • 期刊论文
    作者: 高清振  ,  GAO Qingzhen  ,  SHI Peicheng  ,  时培成  ,  潘道远  ,  PAN Daoyuan
    页码: 152 - 160
    2022/01/01
    17
    0
    0
    0
    为分析元件相关性对氢燃料电池系统可靠性的影响,以集流板、扩散层、催化层的性能状态与质子交换膜的温湿度失效之间的相关关系为研究对象,采用马尔可夫方法建立元件多态退化模型。通过迁移系数描述状态迁移率与元件关联特性的关系,构建新的状态转移矩阵。基于通用生成函数,推导出关联系统的多态可靠性分析模型,并讨论其多元件关联特性。结合Kolmogorov方程,求解多态元件各状态的概率,分别研究单组关联及多组温湿度关联共同影响下电池系统的可靠性变化趋势。结果表明:质子交换膜的状态迁移率随集流板、扩散层和催化层的性能退化而变化;当这些元件处于高性能状态时,质子交换膜的相关性使系统更可靠;相比之下,当这些元件处于低性能状态时,相关性使系统可靠性降低;冷却元件状态对系统可靠性的影响大于加湿元件状态的影响。研究成果可为氢燃料电池系统可靠性设计与评估提供理论依据。
    查看更多
  • 期刊论文
    作者: 郑健  ,  杨耕  ,  耿华
    页码: 144 - 151
    2025/01/01
    33
    0
    0
    0
    新型能源微电网在孤岛运行模式下的经济性与可靠性依赖于储能系统(ESS)的作用。在日尺度调度中,ESS功能需求被转化为综合考虑微电网多日能量需求的每日ESS能量调度,其中包括电池荷电状态(SOC)日初值的确定。本文分析了微电网多日供用电典型工况下ESS初始SOC的不同需求,提出了一种基于多时间尺度预测与调度技术的ESS日初始SOC确定方法。设计了调度模型,并引入日SOC终值的下界约束;该下界根据ESS在多日运行工况下的能量需求给出。基于该调度模型,通过多时间尺度调度确定次日的初始SOC,并作为次日调度的输入。日调度与初始SOC的确定滚动推进,从而保证基于ESS的调度能够满足微电网的多日能量需求。最后,通过算例说明了所提方法的有效性。
    查看更多
  • 期刊论文
    作者: 朱晨光  ,  於锋  ,  罗潇  ,  于峰  ,  吴晓新  ,  吴晓欣
    页码: 133 - 143
    2025/01/01
    25
    0
    0
    0
    To reduce the switching frequency of the traditional three-level permanent magnet synchronous machine (PMSM) model predictive control (MPC) system, a three-level MPC method for PMSM based on subregion switching frequency optimization is proposed in this paper. First, the space voltage vector plane is divided into 12 sectors, and the voltage vectors in adjacent sectors are selected as candidates according to their positions at the previous time. Then, the restriction on switching state is added, so that only one phase switch is allowed to be changed continuously in each switching period, which can effectively decrease the switching frequency while reducing the number of candidate vectors. Furthermore, the midpoint potential balance can be achieved by utilizing the negative and positive redundant small vectors that have the same space position but exert opposite effects on the midpoint potential. Finally, both simulation and experimental results verified the effectiveness of the proposed control strategy.
    查看更多
  • 期刊论文
    作者: 郑诗程  ,  周甜军  ,  ZHENG Shicheng  ,  ZHOU Tianjun  ,  郎佳红  ,  LANG Jiahong
    页码: 126 - 132
    2025/01/01
    25
    0
    0
    0
    In this paper, a speed sensorless direct torque control strategy for a brushless doubly-fed induction machine (BDFIM) based on extended Kalman filter (EKF) is proposed. By analyzing the mathematical model of a three-phase BDFIM under a rotor speed coordinate system, the state and observation equations of the system are derived, thus realizing the estimations of rotor speed, power, and control winding flux linkage based on the EKF algorithm. According to the estimation of flux linkage, the magnitude of electromagnetic torque is calculated, and the direct torque control of BDFIM is realized by determining the orientation of control winding flux and the inverter’s switching state. Simulation results show that when a step change in speed and a sudden change in load occur, the proposed control strategy can achieve accurate estimations of speed and flux linkage, and the system can run stably.
    查看更多
  • 期刊论文
    作者: 乔之勇  ,  乔志勇  ,  史一乐  ,  施怡乐  ,  张良  ,  张亮  ,  王顺利  ,  张楠  ,  刘志贵  ,  刘知贵
    页码: 115 - 125
    2022/01/01
    19
    0
    0
    0
    随着LED照明应用领域的不断拓展及健康光源的迫切需求,LED光源的频闪问题日益受到关注。流经LED光源的纹波电流不仅会引起频闪,还会对光通量、色度性能及光效等产生不利影响。无电解电容LED驱动器的纹波补偿技术可兼顾长寿命与低纹波等性能指标的优化设计,从而为人们提供高效率、节能且更健康的LED光源。本文系统归纳与分析了无电解电容AC-DC LED驱动器的关键技术及纹波补偿控制策略;此外,针对工程应用,进一步提出了大功率无电解电容LED驱动器的合理指标要求、拓扑结构、小信号建模、自适应数字电流预测控制、自适应纹波补偿控制及高频能量同步传输控制,以期推动绿色健康LED驱动器的研究。
    查看更多
1 2 3
温馨提示
确认退出登录吗?
温馨提示
温馨提示