A power control scheme with maximum power point tracking based on solely voltage feedback control loops is proposed in this paper for a dc/ac isolated high frequency PV micro-inverter. The presented power circuit topology consists of an integrated continuous conduction mode (CCM) boost converter with an asymmetrical pulse-width modulation (APWM) controlled CLL step-up resonant converter and a half-bridge grid-side inverter. The presented topology is capable of achieving CCM input current and a wide range of zero voltage switching (ZVS) operation for the front-end stage. The proposed power control scheme, as well as the developed maximum power point tracking (MPPT) control technique, utilize the resonant circuit’s resonant capacitor voltage and the APWM input voltage of the resonant circuit only to achieve MPPT and to control the active power of the overall system. By doing so, a large electrolytic input filtering capacitor is not needed. This allows small size film capacitors to be used and improves the system lifetime expectancy. The theoretical analysis and the detailed descriptions of the proposed power control scheme for the presented PV micro-inverter are provided. Simulation and hardware results on a 220 W with 120 Vac, 60 Hz output hardware prototype are presented to demonstrate the performance of the proposed PV inverter system.